Characteristics and Advantages of High Temperature Hot Melt Adhesive

       High temperature hot melt adhesive is to use hot melt machine to melt high temperature hot melt glue, the glue after melting glue into a liquid, through the throat of high temperature hot melt glue machine and spray gun, to the surface of the adhesive. High temperature hot melt adhesive has been bonded after cooling, it can satisfy the requirements of carton sealing, and overcome the shortcomings of previous carton sealing methods. 
High temperature hot melt adhesive characteristics:
 
       High temperature hot melt adhesive is a kind of solid fluxing polymer without solvent and 100% water. It is solid at room temperature. When heated and melted to a certain extent, it becomes a liquid adhesive that can flow and has a certain viscosity. It is light brown translucent body or white after melting.
    
       The main component of high temperature hot melt adhesive is the basic resin, which is made of ethylene and vinyl acetate under high pressure. It is made of hot melt adhesive with tackifier, viscosity regulator and antioxidant.
       1. At room temperature, it is usually a solid. When heated to a certain extent, it melts into a liquid. Once it is cooled below the melting point, it quickly becomes a solid (that is, solidified;
       2, it has fast curing, low public damage and strong adhesion, and the adhesive layer has a certain flexibility, hardness and certain toughness.
       3, the glue is applied to the glue layer which is cooled and solidified on the sticky material. It can be reheated and fused again, and then become adhesive and adhesive. It has a certain viscosity.
       4. When used, the hot melt adhesive is heated and melted to the desired liquid state, and applied on the sticky object. After pressing, the adhesive solidifies in a few seconds, and within a few minutes it can be hardened, cooled and dried.
       5. Commercial hot melt adhesive is usually made into a cylinder